T5

A Record of important things…

More BodyWork


Pasted Graphic 2
With the controls initially fit, it’s time to get back to mounting the seatpan and body shell.  When I last left this task I had done all the fitting of the pan, and added some flox pads to fill the gaps between the pan and the metal tabs.  They’re fit up pretty well and tomorrow I’ll drill the floorpan bolts.
IMG_1663

The pan pretty-well centered.  The hump at the top is slightly offset to the right in this picture.  This is because the mast will be slightly offset as well and the control rod presumably goes to the center of the mast.