Pan Drilling
06/15/11 22:06 Filed in: All
Finally got around to drilling the pan to the frame. It took a little more flox and some sanding to get things perfectly level and the tabs in place without much bending of the tabs (only a couple needed very minor tweaking).
To drill the “blind” hole I first marked the arc at the correct distance, and also lined up a laser level with the hole from the outside. I started with a tiny bit and worked up to final, tweaking the position while checking from the inside.
It was only maybe 10 mils off by the time I got to final size. Not bad.
To drill the “blind” hole I first marked the arc at the correct distance, and also lined up a laser level with the hole from the outside. I started with a tiny bit and worked up to final, tweaking the position while checking from the inside.
It was only maybe 10 mils off by the time I got to final size. Not bad.